Solved

A Smiple Mbti teat

Forum|Forum|1 year ago
June 13, 2024
2 replies
117 views

+1

gnelx07

I am building a simple version of the MBTI personality test, with a total of 12 questions, each question has two options, A and B. Questions 1 to 3 are a group. As long as you choose A for both of them, you are classified as E person. On the contrary, as long as you choose B for both of them, you are an "I" person. And so on, for a total of 4 groups. Each group of 3 questions, for example, ends up with E, S, T, and J, which is the ESTJ personality, please help.

Best answer by Chee Heng_SZ

Hi @gnelx07 ,

Perhaps you can do two branch logic for each group, resulting in an embedded data value, slot#. Then, after the four groups, set an embedded data resultvalue = piped text of slot1slot2slot3slot4.

Example, first branch listing out all conditions of 2A that gives E, second branch for 2B that gives I.

(if Q1 selects A and Q2 selects A) or (Q1 selects A and Q3 selects A) or (Q2 selects A and Q3 selects A), then slot1=E.

(if Q1 selects B and Q2 selects B) or (Q1 selects B and Q3 selects B) or (Q2 selects B and Q3 selects B, then slot1=I.

C

+22

Chee Heng_SZ
Answer
Forum|Forum|1 year ago
June 14, 2024

Hi @gnelx07 ,

Perhaps you can do two branch logic for each group, resulting in an embedded data value, slot#. Then, after the four groups, set an embedded data resultvalue = piped text of slot1slot2slot3slot4.

Example, first branch listing out all conditions of 2A that gives E, second branch for 2B that gives I.

(if Q1 selects A and Q2 selects A) or (Q1 selects A and Q3 selects A) or (Q2 selects A and Q3 selects A), then slot1=E.

(if Q1 selects B and Q2 selects B) or (Q1 selects B and Q3 selects B) or (Q2 selects B and Q3 selects B, then slot1=I.

G