Hello. I want to conduct annual surveys with always the same participants. I want to have the answers to the questions already filled out with the answers that were given by the individual respondents in the last survey round. Is there a way to do this? If yes, how?
The first question in my survey is a constant sum question where the total automatically calculates and displays at the bottom. Then throughout the survey, I would like to apply the following logics based on the total from that initial constant sum question: (immediately after the constant sum question) Skip a few questions ahead in the survey if the constant sum total = 0 (later throughout the survey, some examples include:) Display a question only if the constant sum total was = 2 or 3 Display a question only if the constant sum total was greater than 3 Display a question only if the constant sum total was greater than 1 However, when I go to set up the skip and display logics, the only options are with the specific items in the constant sum question, not the total. Can someone please help me figure this out? Thank you very much!
Hello all, I am trying to add a system of attention/error checking to my survey so that participants who do poorly in practice questions will be cycled back through the instructions page and encouraged to reread them carefully. The format of the questions is multiple-answer multi-choice questions, where the participants are supposed to select all relevant answers to the question. Is there a way, with javascript or otherwise, to apply if-then statements to the participant's selected answers, such that, for each incorrect answer an embedded incorrect value increases by one? Thank you.
Hi! I have a contact list with contact information and embedded data that I want people to check and validate in a Survey. So the fields such as First name, last name, etc should be prepopulated with the information I have and the user could edit if needed. Is there a simple way to do that? Thank you!
About the age question - I see the ages on the screen, but when you download to SPSS the data is different, and it seems that Qualtrics automatically add labels - which are probably the correct answers. The question in the questionnaire is defined as a Dropdown List / Multiple choice. What is the best way to solve this problem? Thanks, Raphael
The multiple-choice question has 10 options, code "1, 2, 3...8,9,10". When I delete the five options and then add it again, the code becomes "1, 2, 3, 4,5,11,12,13,14,15”，how can I make it "1,2,3...8,9,10" again? thanks a lot.
Hi fellow Qualtrics users, Does anyone know how to solve my problem, described below? I have a set of 10 yes/no questions. These 10 questions need to be randomly displayed to participants. Every "yes" should be scored 1 and every "no" should be scored 0. At the point when participants give 5 "yes" answers (that is, when the score = 5), I want participants to be directed to another question (let's call it Question X). How could I set this up? I am familiar with the scoring tool on Qualtrics and I know how to set embedded data to capture the score. However, I am facing two challenges: 1. How can I check for the score after each question, and when score = 5, direct participants to Question X? 2. How to randomly display all 10 yes/no questions with the logic I described above? The randomizer in the survey flow does not seem amenable to the complex logic, although I can see how solving (1) potentially solves (2) as well. Thank you very much.
Hi every one I would like to know if it is possible to export my survey responses periodically to an SFTP automatically?
I'd like to be able to visualize the response duration times for one of my surveys, preferably in a bar chart, as well as see mean response time. Is this possible?
Hello, I need to be able to send email triggers that contain a URL with piped text using a text response from users. When the response contains spaces, it causes an error. It seems I need URL encode the text response for the piped text in the email trigger. I am totally unfamiliar with javascript but it seems it's the only way to accomplish this. Can anyone provide the solution I need? Instructions for implementing would be much appreciated as well.
How can I control surveys based on progress of each participant? I need participants to take a unit of task a day. A unit consists of 2-3 passages, 2-3 questions per a passage. It's basically reading comprehension task, daily training. 1) A participant should take one reading task (2-3 passages) a day. 2) The next day, the participant will take the next reading comprehension task. This following task should be opened/displayed (the next day:optional) only when the previous task is done.
In my survey, I have questions that are very similar, except that some of them refer to cigarettes (i.e., combustible tobacco) and some refer to e-cigarettes (i.e., electronic cigarettes). In the questions that pertain to e-cigarettes, the product is identified as such, with e[hyphen]cigarette. Because it's important that my respondents be able to differentiate between the two products, I would like to prevent the hyphenated word, "e-cigarette," from breaking up across lines, as one can do with non-breaking hyphens in Word. Is this possible? In my initial contact with phone support, the tech said no, but he seemed fairly uncertain. Ideas? Thanks in advance!
I need to create a table similar to the attached picture. The first four columns will be radio buttons but the last column needs to be a text field. I am using a matrix to create this table but I do not see a way to add a text field as the last column. Is there anyway to do this. !
Hi All! I'm fairly new to using Qualtrics and have come up against a problem in building my survey that I can't seem to find a solution to online. I have 2 'filter' questions for respondents, asking their familiarity with 2 different innovations. If a respondent is familiar with innovation X, they are then branched to the question block about innovation X. If a respondent is familiar with innovation Y, they are then branched to the question block about innovation Y. If they are familiar with neither, they are skipped past this section. The problem I am having is when a respondent is familiar with BOTH X and Y. In this case, I want them to be randomly allocated to one of the two innovation - specific question blocks. I have played around with randomizers, but can't seem to get it to work with the branching logic I already have. I'd be very grateful for any insights you have!
I am surveying the attendees of a conference. I have a question for attendees to select the concurrent session they attended. The next questions uses piped text which the selected choice to indicate their satisfaction with the presenter and the topic. I put a page break between the two questions and the survey works great. However, I can't create a report that extracts the data. I have attached a screen shot of the two questions. Any guidance on how to put this in a report is greatly appreciated.
I have a Matrix table along the lines of: Please rank the following items (list of ten items) as: Very Satisfied, Satisfied, Neutral, Dissatisfied, Very Dissatisfied I then want to use Display Logic to display an additional question if say 5 of the 10 answers are Dissatisfied or Lower. Something along the lines of "You indicated you were dissatisfied with several items, please explain" Using the display logic and the COUNT function, I can display the question if 5+ of the answers are Dissatisfied or Very, but I can't get it to display if say the TOTAL of both dissatisfied and very dissatisfied are 5+. I've tried so many different permutations, but can't seem to just find the right way to do it. It seems like it something that should be possible, I'm just missing the key.
I would like my respondents to have the same base elements of the survey, then either randomly be assigned a set of blocks about trees or about sea turtles. How can I get my survey flow to show either one set of blocks or the other? I don't want to randomize per block, but randomize per group of blocks. Thanks!
I'm referring to the contact field of "phone" not an embedded data field !
I have a book request form that I use for students to provide me with the ISBN number, title, and author so that I can order the book for them. .When the student has completed the necessary information. I have created a yes/ no question asking if they have any other books. If a student has requested multiple books. How to I reuse the questions that I ask in the previous question block? Please bare with my Qubueness.
I am very new to Qualtrics Survey platform. We have been using Immediate Feedback Assessment Tests for many years and I would like to continue using similar scoring now using Qualtrics. What I would like to know, is it possible to allow a respondent to answer a question until they get it right, with each incorrect response lowering the point value (Total if correct on first try would be 4 points, then 3 if they get it on second try, then 2.....)?
Hello everyone. I am editing 3 separate surveys, but I was thinking about the possibility to create only one big survey with 3 different surveys inside, that I would like to randomize. The idea is that each subject would take one of the 3 possible surveys randomly. Is it possible? Thank you very much.
Is it possible to setup an email alert when a certain survey is completed? Or to get a daily digest of all activities across all of my surveys?
I would like to use survey responses from a table of household members to calculate the total number of adults, kids and seniors. I have written javascript code to make the calculations and added this to a second block of the survey. I can read in the values entered but cannot get the calculations to show up. This is how it works. First the respondent enters in the names, ages and gender of the respondents (morador is household member) ! The next question (in a new block) includes the javascript and pipes in the embedded text and answers to individual survey questions. ! The indivudal age values show up, suggesting that the data are being read, but the javascipt calculations do not. This is what I see (notice the ages are listed, but the calcualtions are blank): ! This is my javascript (I tried it in the Onload and OnReady sections – neither works) Qualtrics.SurveyEngine.addOnload(function() { // These lines read in the entered data on age let age1= "${q://QID8%232/ChoiceTe
I would like to use survey responses in the calculation of values that then are presented in the survey in real time. I cannot figure out how to show these values in the survey. Should I create the new value as embedded data (in the survey flow) and then add this as piped text or should I use javascript to create a new value that is then set as embedded with (Qualtrics.SurveyEngine.setEmbeddedData("Total",sum_total) in the javascript? I have tried both options and cannot get the calculated values to show up in the survey. These are the calculations I'd like to make: Take all the family members who are entered with age into a matrix table (drop down choice for age) and summarize them into three categories: kids, adults, seniors. The objective is for these three values to be provided in the survey so the respondent can confirm the answers. (See screen shot below). !
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
