I learned that I can use the QState_Q# format to have the zip code automatically add the state to my survey results as embedded data. I can get it to work with the single line responses, but it won't pull the data when I'm using the form response. If someone could give me some insight into what I might be missing in the setup, that would be much appreciated. I also have an issue in the survey flow regarding the embedded data that I haven't been able to find anything on in the forums or on the help site. Not sure what the "Reserved Embedded Data fields cannot have custom values" message means either. I'm using this data in a file upload, so I am trying to not have people enter their states manually (leads to manual work on my end). Any thoughts or suggestions would be greatly appreciated!! I've been trying to figure this out for a month now. Here is the form question asking for the zip code with the US validation setting selected. ! Here is zip code single line with US validatio
How can I highlight or mark (X) rows in a matrix question that don't have a response? On the validation screen, I'd like an X, a box, or a highlight feature for the items not answered in the battery (e.g., scaled battery)
I have participants doing a task where they must alternatively type 'a' and 'b' a certain number of times. I have everything working appropriately and have a timer that checks to see how long they work on it. What I need is to disable the participant's ability to continue until they hit the prescribed threshold. Here is what I've been trying to work with. This works fine for the task but not for forcing them to get to the threshold. In this example, the threshold is 500 times. Qualtrics.SurveyEngine.addOnload(function() { $('NextButton') && $('NextButton').hide(); $('PreviousButton') && $('PreviousButton').hide(); choices = []; count = 0; timerID = document.getElementsByClassName('Timer FlipClock')[0].id; allTimes = ''; var that = this; //Key Codes: A=65, B=66 Event.observe(document, 'keydown', function (e) { choices.unshift(e.keyCode); choices = choices.slice(0,2); if(choices[0] == 65 && choices[1] == 66 && count < 500) { var time = $(timerID).getAttribut
Hi everyone, I am a newbie and I need your helps for a within-subject randomization. In my survey, I have 100 blocks (block 1 to block 100), each block has 2 version (version A and version B). It means I have 200 blocks in total, i.e. block 1A, block 1B, block 2A, block 2B, …. Now I want to randomly show them 50 blocks including 25 blocks of version A and 25 blocks of version B, given that if a block is shown with version A, it will not be shown with version B. If I put all of 200 blocks under a Randomizer in Survey Flow, and randomly choose 50 out of 200, it will lead to 2 problems: - Problem 1: I may get 40 blocks of version A and 10 blocks of version B instead of 25 version A blocks and 25 version B blocks. - Problem 2: one block may be shown with both version A and B. Could you advise me how to use Qualtrics features to overcome 2 problem, especially problem 2? Thank you very much. Tomas
Once the report returns from my survey distribution, i.e. what addresses failed or bounce; can I get a list of those "bad" email addresses?
Hi, I am trying to a. assign a code to survey participants where each code represents a count of the number of submissions to the survey. So, participant #1 gets code '1', and participants #2 gets code '2', and so on..., and b. save different sections of the same survey in different data file. For example, I want to keep participants' email address separate from their actual responses to the survey. So, I can separate identifiable information (e.g., email addresses) from survey responses. How can I achieve the above two tasks? I know how to generate random numbers and assign them to participants in qualtrics, but I am not sure if I can give a count of number of submissions to each participant so that every participant gets a unique number. Thanks for your assistance and time in advance! Best, Roy
Hi, I have created a constant sum matrix question and I want to validate the total of each row against values given in a previous question. Unfortunately the custom validation function does not let me validate against totals. Each row will have a distinct value that the total needs to be validated against so I can't use the 'Must Total' field. Does anyone have a solution to this? Thanks
Is it possible to mass export responses from a single question which is common throughout several surveys, into 1 single report? Thanks!
Hi everyone, as most of you have experienced, there is a way in the web app to export the responses of a specific participant as a PDF. I have been trying to replicate that step using the API. However, I cannot find a way on how to do it. It looks that currently there is no way do that process using the API, but I was wondering if there is a "hacky-way" that someone has found, or if there is another idea on how to export a specific response of a survey as a PDF? If anyone can shed some light on this question, I will appreciate it. Thanks.
I've found lots of code for recording response time but it's always embedded in code that does something else too and I don't know enough to separate out the code I need. I'm a complete newbie. Any help is much appreciated!
When upgrading from free service to "Research Essentials", the website details that you go from having access to 7 questions to 8. Do you get to select which question type this is? I really only need the "File Upload" feature, and would like to pay minimal amount possible.
Select any one of the attributes given below: ``` A B C ``` These attributes has to be selected by the participants for further decision making. If A and B are selected, I need to show A and B along with their embedded data in a table format automatically. Imagine if A and B is selected out of the 3 attributes, I need to show it like the table below automatically for participants evaluation. ``` A 50 80 B 40 30 ``` Further if they select only C, C has to be displayed but not A and B. ``` C 90 100 ```
Hi everyone, I am used a template to set up a Conjoint in Qualtrics using JavaScript and HTML. The Conjoint itself works perfectly, but I need Javascript to also save the attributes it showed to the respondent in the csv file because otherwise I cannot analyze the data. I also have code for that but somehow it does not work, it would be really great if you guys could have a look and help me out! A conjoint is usually a table showing two profiles that consist of randomly selected attributes. I need to know the attributes the respondent received for the analysis. Here is the code that I am using right now and which does not work. It only saves the first item and the order of the dimensions but everything else is empty, why could that be? Qualtrics.SurveyEngine.addOnload(function() { /*Place Your Javascript Below This Line*/ this.setChoiceValue(1,immy_a__1); this.setChoiceValue(2,trade_a__1); this.setChoiceValue(3,policy_a__1); this.setChoiceValue(4,immy_b__1); this.
Hi all, I have a survey with a slider creative (see attachment below), user see the button "Aiutaci a migliorare", if they click on it they find and NPS with a comment box. I want to set this survey in order to close it, and hide the "aiutaci a migliorare" button when users click on "Send" and fill the survey. If I should be able to do it using Javascrip. Could you help me? ! ! Regards
Hello Qualtrics Community, I am attempting to use Qualtrics to distribute a survey, using the API. All the requests I have tested have worked fine, so far, except when I attempt to distribute the survey. Then, I get this error, saying "You do not have permission to access distributions for this survey." My belief is that the account I am working on has permissions limited, and there is a control panel in the "master admin" account for the license I am working under. Is this correct? Any help is greatly appreciated. !
So, I'm trying to format my text analytics query so the logic has several options to look for, but I would like them to be used with a NEAR operator. So far, everything which way I've tried has not given me accurate results. I can make the search more broad, but I'm trying to pin point what I need to see. Here's what I'm wanting the results to provide, and how I'm currently formatting the query. Any help and insight is much appreciated. What I want: To see any results where someone said they were promised an adjustment/credit, and have not received it yet, and not when someone mentions their credit was pulled/checked. How I'm thinking it should be formatted: ((was told OR promised) AND (credit OR adjustment))~6 AND NOT ((credit AND (check OR hit OR ran OR pull))~3 Is this type of logic possible and if so, how would I format this correctly? I can write it out in a longer format by making each one a separate statement with it's own NEAR operator ((was told credit)~6 OR (was told
! When exporting the survey in word document, the text (question or even descrptive text) shows the font codes such as per attached Which is not convenient to share this file with random people. Is there any way to export the survey by removing those codes? (I already unchecked all options of export!) Thanks for your help !
We have more than 15,000 free text comments from our NPS survey respondents, growing by 500+ comments a week. Many of those comments mention individual staff by name - usually in a flattering way, but sometimes in a very derogatory way. We edit the latter to remove the staff name, but we also want to mine the positive comments for staff mentions so we can recognise/reward those staff. It happens informally at the frontline of care (we're a hospital group) but we also want to send a shout out from head office every now and then. Does anyone know if there is a way to do this? For example, to search for terms which begin with a capital letter - that wouldn't capture all of the relevant comments but it would find most.
It used to be that when I uploaded a list of contacts to Qualtrics, it would not integrate with the directory. This allowed me to export lists from Qualtrics, with only the embedded data that I uploaded. I don't want the other embedded data fields, only what I uploaded to the contact list. Also, this becomes an issue when adding an embedded data section to the survey flow, as it's adding everything for that contact, even if it's outside of the contact list.
Hi Y'all I'm having problems with the SFDC integration with Q. Here is our implementation structure: Case & contact data from SFDC --> Contact Directory in Q --> Survey trigger --> Survey absorbs all case & contact info as embedded data. We have 3 different channels from SFDC to Q to trigger surveys and collect customer feedback on 3 of our different support groups (that serve the same customer base) Recently, I have seen multiple instances with duplicate survey responses registered for the same case. After my initial analyses I found that customer took 2 different surveys (with diff case #s that I can infer from the distribution data) but the responses are mapped back to one case #. After talking to Q Support, I understand that when a new case (lets call it C2) for a customer (let's say "John") is closed in SFDC and info sent to Q to trigger a survey, Q UPDATES all data fields associated with the customer A, be it contact data or case data. Now what happens if the custome
Hello, I am running a survey where participants listen to 20 music clips, randomised in order, and rate them according to a characteristic on a slider. Then they listen to the 20 clips again and rate them again with the slider, in an identical way but in a different randomised order. I.e. I have two repetitions of the 20 trials, leading to 40 trials in total. I used the survey flow option to set up the first randomiser, and then duplicated it there to get the second repetition of the 20 trials. However, I notice that in the survey, when participants get to the second repetition, the responses they gave on the slider in the first repetition appear. In other words, the slider doesn't start at the left end anymore, as it did before, but has 'remembered' where the participant put the slider in the first run-through. I want participants responses to the second repetition to be unbiased by their first. How do I fix this so that when they do the second repetition, the slider is again at the
Could anyone tell me whether I can change question type for all the questions in a block? Let's say, in a block, the original question type for all the questions is "multiple choices", however, I want to change those questions into "slider". Is there an easier way to do that instead of editing each questions one after another? The reason is that since the import txt survey function does not support slider questions, I have to format the question type into "multiple choice" for importing, although, the correct question type should be in slider. I have to import all items in the form of multiple choice questions first, and then change the question type from "multiple choices" into "slider" for all the questions. Thanks for your help!
Anyone have a way to take only 1 of the "Selected Choices" from a matrix table to be able to pipe the choice into another question? I have 16 statements and 5 scale points. I want to be able to pipe in only 1 of the selected statements if they answer "5". Using ${q://QID3/ChoiceGroup/SelectedChoicesForAnswer/5}, bring in all the answers selected for "5".
Hi I have a manipulation check that is basically binary (i.e. correct or incorrect response). We would like to count the validation fails in order to demonstrate that participants weren't just guessing and pushing or being pushed forward into the study. We tried javascript and an embedded data but it requires a refresh of the question and that does odd things. One solution we found was to branch if the validation fails and increment an embedded data counter. However we need to return participants to the question until they get it right, and it seems the only way to do this is to copy the question and put the copy in the branch logic. In other words: a participant sees Q1 and fails validation; in the survey flow branch logic the embedded data counter gets incremented and the participant is sent to a copy of Q1; repeat until they get the manipulation check correct. If possible, we'd like to avoid the messiness of extra copies of each manipulation check. Any suggestions? Thanks! Chris
Hi all, I'd like to create a function which would put the number of times printscreen key was pressed into the embedded data. However, I found out that I'm not able to change the value of the embedded field from my event listener. I tried to change HTML of a given element from my function instead and it didn't work neither. There are no errors in the console. Both lines of the work in case they're outside the event listener. Would anyone have some ideas how to solve this? Qualtrics.SurveyEngine.addOnload(function() { var that = this; var id = that.questionId; jQuery("#" + id + " .QuestionText").append('<div id = "my_n">my_n</div>'); jQuery(window).focus(); jQuery(document).keyup(function(e) { if (e.keyCode == 44) { Qualtrics.SurveyEngine.setEmbeddedData('print_screen', "TEST"); jQuery("#my_n").html("TEST"); } }) });
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
