For the past few weeks, whenever I go to clean my data set and delete bad responses, Qualtrics has taken a reallllly long time to process the request. Is there something going on behind the scenes that has caused this sudden slow down?
I started a survey last year not realizing that when you reload a drilldown question with an edited list, it will RECODE all of your values. I have about 60 program specific reports that I am basing off of the value of these codes. Since I plan to use this program monthly for a few years I accepted just updating the filters but unexpectedly I have more changes to the drilldown. To avoid hours of redoing saved filter I am trying to hard code the drill down. I am having decent success but when I click the next button my program name and program number get wiped out of the input. If you can provide any help with how to prevent that from happening I’d appreciate it. Otherwise I have a work around where I save the program number in the Embedded data and base my filters on Embedded data instead of Question data. That is okay but it takes some working and fingers crossing to get this set up BEFORE having data that chose a particular program number - a requirement as I am showing people their
Hi, I am including some custom Javascript to add in text for response options that appear when hovering over the response text. If the survey respondent does not have Javascript enabled, how does that affect the display and functionalities of the survey? Thanks!
Hi, Is it possible to set Collaboration on a bunch of surveys at the same time? I want to share about 20 surveys with a colleague and want to know if there's a faster way than to set collaboration on each one of the surveys individually.
Hello,I am working on a project which involves surveying 110 participants and measuring their scores along six dimensions. Then those participants will nominate 5 peers and the peers will rate their nominator along the same six dimensions. I am aware that qualtrics has a 360 degree feedback tool. However, my university does not have the license to use this tool. I am wondering anyone has any recommendations about how I might go about this survey?At the moment, my plan is to conduct two separate Qualtrics surveys: One of the participants and one for the peers. After I receive the data from the peers, I will need to work out the average scores along the six dimensions for each of the 110 participants and add them to the participants scores. This will mean working with two separate data sets will make the analysis complicated.Has anyone every done anything like this before ? Or perhaps you could point me in the right direction.Thanks for your help.
Hello, For my study i want to link data of one survey (trainers-survey) to the data filled in by their athletes which is in another survey. Is this possible? And how could i do this? can someone help me with this?
Hi all!For a current survey I would like to have a question with 5 statements which can be answered with a value between 1 and 5 (either with a matrix with 5 columns OR as an alternative I thought of a matrix with just 1 column and one text box per statement to fill in a number between 1 and 5). You can see the two possible options on the screenshot below:However, I would like respondents to assign up to 15 points in total. I cannot use a "Constant sum" question as they would have to insert exactly 15 points - in my case it could be less or equal 15. Does anybody know how to do that? Do I need to use JavaScript for that? I would be super thankful for every info you can give me! Thanks a lot and kind regards
In a side by side question I have 3 columns and 4 items. The first two columns contain items with text entry options, the third with a MC option. In the second column I just want to display the text entry field of the first item, the other 3 need to be hidden. ! How can I set-up this? Using JavaScript? Does somebody have an example?
I am trying to randomize people to 4 different conditions at a ratio of 2:1:1:1. Ie, in a sample of 1,000 - 400 see condition A, 200 see B, 200 see C, 200 see D. Is there a way to do this using the randomizer tool?
How do I force a response to a text entry question if certain responses in a matrix table are selected within the page? For example, I have a matrix with five scale points and eight statements. If the respondent selects a 1 or a 2, for any of the eight statements, I want their response to the next text entry question to be required/forced. The responses of 3, 4 or 5 for the eight statement enable the respondent to progress without forcing a response to the text entry question.
Good afternoon from a cloudy Sweden!I have to create a “survey” where I use a Multiple Choice question and a dropdown where a user needs to select a specific value, in this case “Data Source”. I have all the values in an excel file, the problem is that there are 148 values. Is there any way I can mass-insert them into the dropdown, or will I have to sit and copy/paste the values into each of the options? Thanks in advance-Mattias
So I am doing a three-part survey. In the first survey, the participants will be randomly assigned into one of the three condition - control, condition1, condition2 and do the task of it. In survey 2 and 3, I want the participants to receive the same condition they have received in the survey 1, instead of being randomized into one of the three conditions again. How can I do that? Plus a small question: I have trouble using the workflow now, it just won’t load and let me use it whenever I click in a workflow to edit, how should I handle this case as quick as possible?
Is there a way to send thank you or reminder emails based on randomization? I need send to specific follow-up surveys (Re-test Concept 1 or Re-Test Concept 2) to respondents based on how they were randomized (whether they received Concept 1 or Concept 2) in an initial survey. I am a relative novice at Qualtrics so I apologize if this has already been answered.
Hello everyone! I have a question as it pertains to skip logic. I came across a question we asked on a previous survey (before coming to Qualtrics) that used a specific logic. I am curious how, if at all, this logic would be implemented in Qualtrics. A mock questions is below: Question 1: Do you like spending time outside?Yes, I love it. → Proceed to Q2 Yes, I enjoy it a good amount. → Proceed to Q2 No → Proceed to Q2, Then Skip to End/Q13 Decline to answer → Proceed to Q2, Then Skip to End/Q13 For options 3 and 4, how would we build this logic into a Qualtrics survey? Does Qualtrics allow for this to be done? Anything helps. Thanks! ---BH
In the Question text field, it says, "Click to write the Question Text" however, clicking and then writing the text, is not possible since nothing is saved. I actually need to click then open the Rich Content Editor to write Question text. This is not the case for answer choice text fields, so I was wondering if this is normal behavior? Also if text that is already in the question field is clicked on, and then clicked away from, it erases the field. It makes it confusing to write text and easy to lose text.
Has Qualtrics developed the ability to create shortened Personal Links so one would not have to go to an external site such as "tinyurl" or some other URL shortening Web Service. As of March this was not available but wondering if something had been done since. Thank you
Dear community,This may be a very simple question, but I haven't been able to find an answer to it.I have a question with 15 items within a block containing other questions. I see the items that make up this question as comprising up 5 subsets (1-3, 4-6, 7-9, 10-12, 13-15), and would like to randomly present participants with 1 item per set so they receive 5 items in total (e.g 1,5,8,10,13 - 2,4,9,11,15, etc). Ideally, I would like to do this in a way that is completely random. I know I could set up specific sets in different blocks and use the randomizer, but that wouldn't allow for complete randomisation. Could anyone advise whether this is possible, or what the best workaround would be?Many thanks in advanceKind regardsSteve
Hi everybody, I tried to fulfill the field age using the code below:Qualtrics.SurveyEngine.addOnReady(function(){Qualtrics.SurveyEngine.setEmbeddedData("Age", "44") });The field is like this:But it doesnt work. How can I do that?
Hi Community,I am facing an issue and couldn't find a solution on the forum.I want to have something like a piped image at the end of my email invitation template, I manage to do it for text, through piped text but didn't manage for image.All my logos are in my library.Thanks !!
Is there a way of copying new reports across two different Qualtrics Projects or do we create new reports everyt? If yes could you please share how could this be achieved? Thank you in advance for any replies, recommendations that you may post.
I am aware that Qualtrics has the ability to generate personalised multiple completes links via Qualtric's emailing system. However, I would like to figure out if there is any way to generate these links without sending out emails, as I'm conducting a study where I'm sending these links out via an external platform.
Hi - We have a survey with a chunk of fine print / legalese text that we would like to put at the bottom of the page, below the next page/submit button. I've tried using the Look & Feel Footer box, but the content continues to appear above the button, which forces respondents to have to scroll down and hunt for the button to move on to the next page. Does anyone know how to get this content to appear at the true bottom of the page, BELOW the next page/submit button? Is this even possible? Thanks in advance!
Hi I have used Qualtrics to create a questionnaire and have desseminated it and received responses. The recorded responses section indicates that I have '153 (135)' responses. When I hover over this response marker it says 'recently removed responses are being processed' (it has said this for days now). However, when I look at the 'Data and Analysis' section I have 5 pages of 82 responses. I have gone through some of my responses and delete some but I have not deleted any more than 10-15 so I am confused by why it says the response is so high yet displays just 82 responses. The problem I have is that although I have just 82 responses to analyse, when I go to the 'Reports' section it includes 153 resposnes in the reports? How do I stop it doing this so that future reports/analyses only include the 82 responses. I hope that makes sense.
Hi everyone,I'm trying to set up my longitudinal survey so that the data from time 1 is brought over into the time 2 survey. This will hopefully enable me to match up the data from the same respondent(s). However, in the steps I'm following to set up a longitudinal survey (see link: https://www.qualtrics.com/support/survey-platform/common-use-cases-rc/pulling-data-into-a-second-survey-longitudinal-surveys/) it says that "In order to use Multiple Choice questions instead of Text Entry questions, you will need to use JavaScript. Qualtrics Support cannot advise on custom coding...". A lot of my questions are multiple choice so this is a problem for me. Has anyone coded this before or does anyone know how to solve this issue? Furthermore, does anyone have a resource that can guide me on how to set this type of survey up? I'm new to Qualtrics so I hope I've explained things sufficiently. Any help would be really appreciated!Many thanks, best wishes,Will.
Hi,I am developing a survey (uni project) where I have a term that is really very specific and instead of having the definition in your face every single time - like cut and paste to the bottom of every question in the survey (its really ugly), I would REALLY like to do a hover over, like I have seen people achieve here in the community.The problem is that the code to use in HTML is lost on me, I have no idea how to actually apply it, so how do I type it in, am I supposed to delete the question part? or paste my question in the middle of the code?... how do I make it so you hover over a word and my definition can be seen? Is it as simple as just cut and pasting the code at the start of the term and it should work?Terribly sorry folks, we didn't do this level of computing back in the day when I was in school and returning as a mature age student, keeping up with this tech and doing my own field of study is proving a little challenging this time!Thank you so much,V.
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
