Survey Platform

I have a survey for which I will be compensating the survey-takers. To keep the survey-takers identity information separate from the main survey, I am collecting that information in a separate survey. For that, at the end of the main survey, I asked if they would like to remain anonymous or provide their information for compensation. This question was used as a branch condition with a customized End of Survey element with a redirect link. Everything works as it should, except that after being redirected to the new survey, it displays the default End of Survey message at the end of the survey. I have specifically used a customized End of Survey message in the survey builder and made sure to have it selected as the End of Survey element in the survey flow for the second survey. I also tried adding the customized End of Survey message at the end of the main survey. However, when the survey is redirected to the second one, in the end, it defaults to the default End of Survey message for so

I would like to score the questions but only show a total score (e.g. 95%) at the end rather than the score for each question and the total score. Is that possible?

Hello, We have created a survey with a series of single choice question presented individually in the screen. Each question presents three choices in column. We have randomnize the alternatives of the question, but we would also like to control for those respondents always selecting the option in the left or only on the right (straighlining). Is there a way we can control for this? I know qualtrics saves later on the order in which the items were presented, is there a way to introduce them into the flow to exclude those participants who always choose the item in the right?Thank you.

Hello everyone, This is the first time I use Qualtrics and I have a tricky (at least to me) question which I really can't get solved by myself. After trying many times, I thought I should try my luck here with the pros. I would really appreciate your input. I have one matrix question with 12 statements/ items and 4 options (code 1-4), then in the next question, I need to pipe one of the statements in the question text, if code either 1,2,3 is selected for those statements. I also need to make sure these 12 statements are on the least fill basis so aiming to show either of the statements equal amount of time. If this is not clear, you can see the two questions below. I tried to go with the less smart way by creating 12 questions in 12 blocks. Each question contains a different statement and a filter for those who could see this question (i.e. code 1-3 for this statement), then I randomise 12 blocks and only show 1 block. But this doesn't seem to work. Could you point me in the right di

Kia Ora qualtrics community.I would like to add a final question to my survey, asking participants if they would like to participate in an interview. How can I add a pop-up email window, which links to my email?Or would it be more appropriate or easier if participants enter their email in the last question?Pro and cons please Thanks a lot.Ngaa mihi nui

I want to carry forward or pipe the highest average selected response to a question from Survey 1 across all respondents into a follow up Survey 2. This would be triggered by Survey 1 closing as a result of either elapsed time or quota achievement, whichever is first.

Hi, newbie to Qualtrics here! What can I do to make respondents see the options they have selected only in subsequent questions? Or rather how can I make the available options for subsequent questions limited to the options they are aware of? Sos

HelloWe've just run a survey where we embedded a survey question in the email for the first time.Interested in knowing other people's experience of conversion rates to the rest of the survey by doing this.The embedded question was the NPS question, once they answered this, the rest of the survey opens in a new tab. The second question in the survey was the usual open-ended question asking why they gave that rating.Just 36% of those that answered the NPS question then completed the verbatim question.In previous surveys, where we have included a survey link within an email the % that answered the verbatim question after the NPS question ranges from 65% to 100%!Have others had similar experiences? Makes me question the value of embedding the survey question in the email, as we get so much value from the verbatim questions to help us understand their NPS ratings.Thanks

I have a survey designed to be filled out on paper that I want to convert to Qualtrics with Advanced Formatting as described here: https://www.qualtrics.com/support/survey-platform/survey-module/survey-tools/import-and-export-surveys/#PreparingAnAdvancedFormatTXTFileHowever, that support page omits many question types, including Slider questions, so I'm trying to find out the syntax this needs. Importing a question using a line [[Question:Slider]] and a line [[choices]] works, but all the default values remain at 0 or undefined, and I have no idea how to configure them. Adding [[labels]], [[slidertype]] or [[statements]] all give me an "invalid directive label" error.I'm using two labels, 'Not at all' for label 1, and 'Very much' for label 2. The 'choice 1' label is left blank. The slider type should be Sliders, and the grid lines off. How do I define this in a text file?

I am using TH to ask likes and dislikes for communication messaging. I wanted to add "Don't have any dislikes" and Don't have any likes" is there a way to do it?

We have conducted a simple randomized experiment performed as a survey via Qualtrics. 751 participants. We need to download data to SPSS SAV format with numeric codes for all answers, but we are not able to do that. We manage to download a SAV file, but only in text format (appears as Notepad file) We follow a recipe BI Norway has added. When followed we do not get all the options listed there (page 1: "export with Legacy format" ) . Critical for us to get this downloaded in SAV with numeric coding.  Can anyone help? Suggestions?

Hi, I have a flow on one of my surveys set up to retreive embedded data fields from my diretory where the information in the directory embedded data fields is concatenated (xxx, yyy). I have set the Flow Embedded Data Field to be a Multi-value text set, but the embedded data field in the flow will only pull in the first value in the string of the Directory Embedded Data Field. It is only returning "XXX" and not "XXX, YYY". How can I set this up to return all values in the directory embedded data field and use them as a multi-value text set?TIA!

Hello. I need to create a survey where a respondent provides feedback on multiple people. I would like the first question to be a list where the respondent chooses who they want to provide feedback on. Once they answer a series of questions, I would like survey to loop back to the first question where they choose another person, provide answer the same feedback questions, loop back to the first question again, etc, etc. I think Table of Contents would be a perfect option here - unfortunately my company doesn't have access to this option. Is there any way to "fake" this look with other options? Thank you.

Hi all,I'd like participants to create their own unique ID where I ask them to list their 3-letter initials plus the last 4 digits of their cell phone number plus how many times they have filled out the survey (they can fill it out multiple times). Therefore, a sample code would look like: ABC12341.How can I set custom validation such that the first 3 entries are letters and the last 5 entries are numbers?

This discussion has been moved.

Hello!I am a Qubie - not very familiar with JS. I have a CSV with two columns: identifier & value. Based on some question's answers I generate the identifier. Now I want to look in the CSV to get the corresponding value for further calculations.identifier, valuexb39, 1100xc20,1200xd27,900How can I (1) get the CSV loaded and (2) get the value which matches the identifier of the respondent? The CSV is uploaded in the Qualtrics library. The corresponding value will be used as piped text (embedded data) in the following questions.Thanks in advance for any help :)

I have a survey set up so that when the user inputs a "0" in a Form Field, it triggers certain follow-up questions to be hidden. If they input a number higher than zero, it requires them to complete the follow-up questions. What I dislike about this solution is that on the dashboard side of things, for the follow-up questions that were hidden, it shows "N/A", and I would prefer that have a "0" instead. Is there a way to carry foward only the "0" responses so that I don't have "N/A"? I don't want to set a default answer on these questions because I'm worried that the user will pass them over. Please advise!

Dear all,I am setting up a multi-country study and would like to apply quotas for each market individually.I created a quota group for the first market and would now simply like to duplicate this group for the other markets but couldn't find an option to do so.Can anyone advise whether this is possible?Thank you!

Let's say I have the following question:What's your favorite fruit?a. Appleb. Bananac. CherryI share the survey and get responses. But I update the 'Cherry' answer choice to the following:What's your favorite fruit?a. Appleb. Bananac. MelonDo all previous responses of 'Cherry' stay? Or do they get updated to Melon? Does it matter if I edit and update that Cherry choice? Should I instead delete that option and instead create a new option that says 'Melon'?

Hi Guys, Thanks in advance for your help. We have done a fair amount of branding work over the past two years and eager to obtain consumer feedback on our catalog and website....is it reinforcing our brand attributes / descriptors? We have a target profile of a consumer base that Qualtrics helps us find so that we can get feedback from consumers who are our target.For our catalog, would you recommend providing a link and then let survey takers browse it...maybe with a task of looking for something and adding in a time minimum and max? Or would you just think it would be easter to provide jpegs of catalog pages?Similar question for our website feedback....would you provide a link to our site and let them browse or provide screen shots for them to comment on....ThanksPete

Is there a way to see on the average number of questions each respondent received?

Hello,I have a question where I list all the dates of a calendar month. I need when participants select a date the next set of questions to appear on the spot for that particular date. Then they need to be directed back to the calendar and select another date if necessary to complete the next set of questions for the date and so on.At the moment, participants select all the necessary dates from the calendar month and the set of questions appears afterward for each selected date. But if for example, participants select 5 dates by the time they complete the next set of questions they might have forgotten which date they refer to. Any thoughts?

REPOSTHi, I'm reposting a question I had from July 7th which hasn't been answered in the hope that someone sees it this time around, I hope that's ok:----------------Hi,I'm doing a study that involves a great many loops over a great many blocks. Long story short, when I download data, there's a great many columns. I'm using the timer question, but I only really need the last click or the page submit metric. Unfortunately with the structure of the study, having the extra 3 metrics actually means 60,000 additional columns which I really don't care about. Is there a way to pick and choose which timer metrics to include?Thanks in advance,Casper----------------

I have 2 lists list of open end responses coming from 2 different experimental conditions (1 list per condition). This is the data I a have collected in part 1 of my experiment. For part 2, I would like to draw one response from each condition (each list), present these two responses to a participant simultaneously and have them select the one they prefer more. The idea is to show that the responses from one condition are more prefered by the evaluatiors (respondents in part 2 of the study), than those in another condition. So the final data would be wide format. For every participant of part 2 and column for messageX from condition 1 would indicate 0 if the message was presented but not selected, 1 if the the messageX was presented and selected, and no value if message X was not presented for this participant. Ideally, I would like to show each participant a few pairs like that. I guess loop&merge should help me solve this issue, but so far i have not figured out how to do that. Is t

I am recruiting participants from Prolific Academic (similar to MTurk) and I need to be able to assign each participant with a 2nd specific participant ID code. The first participant ID number will be automatically provided through the Prolific website, which will be necessary so I can pay the participants. The second, non-prolific ID number is required so the participants can complete a task on a different platform in the middle of the study. This non-qualtrics platform will only allow participants to enter ID numbers that I have already added previously as a "possible ID number". Therefore, I need to retain the original prolific ID number and assign nonrandom ID #s. Thanks for your help.