Time out (logout) while in Survey Flow | XM Community
Skip to main content
Solved

Time out (logout) while in Survey Flow


Clint
Level 2 ●●
Forum|alt.badge.img+5
  • Level 2 ●●
  • 46 replies
Has anyone else been randomly logged out of Qualtrics while working in the survey flow? I say "randomly" because it doesn't happen to me all the time nor does it seem to happen after a certain amount of time. It's just annoying because my work doesn't get saved, so I have to go back in and redo everything from my last save.

Best answer by AnthonyR

> @Clint said: > > @AnthonyR said: > > @Clint qualtrics does have a 1 hour of inactivity timer, after which it gives a countdown warning, then logs you out. Is this happening while you are actively working on a project? > > No countdown warning. This happens while I'm actively editing survey flow. That is strange at best... I'm not certain but there MAY be some sort of brand level setting that sets a max time you can be logged in for? I'd definitely contact support about this one.
View original

29 replies

AnthonyR
Level 4 ●●●●
Forum|alt.badge.img+7
  • Level 4 ●●●●
  • 306 replies
  • November 15, 2017
@Clint qualtrics does have a 1 hour of inactivity timer, after which it gives a countdown warning, then logs you out. Is this happening while you are actively working on a project?

Clint
Level 2 ●●
Forum|alt.badge.img+5
  • Author
  • Level 2 ●●
  • 46 replies
  • November 15, 2017
> @AnthonyR said: > @Clint qualtrics does have a 1 hour of inactivity timer, after which it gives a countdown warning, then logs you out. Is this happening while you are actively working on a project? No countdown warning. This happens while I'm actively editing survey flow.

AnthonyR
Level 4 ●●●●
Forum|alt.badge.img+7
  • Level 4 ●●●●
  • 306 replies
  • Answer
  • November 15, 2017
> @Clint said: > > @AnthonyR said: > > @Clint qualtrics does have a 1 hour of inactivity timer, after which it gives a countdown warning, then logs you out. Is this happening while you are actively working on a project? > > No countdown warning. This happens while I'm actively editing survey flow. That is strange at best... I'm not certain but there MAY be some sort of brand level setting that sets a max time you can be logged in for? I'd definitely contact support about this one.

RondaD
Level 1 ●
Forum|alt.badge.img+3
  • Level 1 ●
  • 10 replies
  • November 16, 2017
@Clint I have absolutely run into this problem while actively working (not after inactivity). So frustrating!

Forum|alt.badge.img
  • 8 replies
  • November 17, 2017
Same here. Seems I get randomly logged out a LOT lately while actively working within Qualtrics. I get a "Session expired" message.

JulieT
Level 3 ●●●
Forum|alt.badge.img+10
  • Level 3 ●●●
  • 61 replies
  • November 17, 2017
Yes!! Same here. Thought it was just me.

AnthonyR
Level 4 ●●●●
Forum|alt.badge.img+7
  • Level 4 ●●●●
  • 306 replies
  • November 17, 2017
Out of curiosity, What browser / OS are you all using? Curious if it is browser specific.

RondaD
Level 1 ●
Forum|alt.badge.img+3
  • Level 1 ●
  • 10 replies
  • November 17, 2017
Chrome for me.

AnthonyR
Level 4 ●●●●
Forum|alt.badge.img+7
  • Level 4 ●●●●
  • 306 replies
  • November 17, 2017
> @RondaD said: > Chrome for me. Hmm, I use chrome as well and don't have the issue. It's not crashing the browser window is it? I know the survey flow editor can start to use up quite a bit of ram and have had it use enough to crash before.

RondaD
Level 1 ●
Forum|alt.badge.img+3
  • Level 1 ●
  • 10 replies
  • November 17, 2017
@AnthonyR Nope. No crash. Just a very polite log-in time-out message.

AnthonyR
Level 4 ●●●●
Forum|alt.badge.img+7
  • Level 4 ●●●●
  • 306 replies
  • November 17, 2017
@RondaD Definitely strange and very likely something the Qualtrics engineering team should be looking in to as a bug. I'd recommend those having the issue put in a formal Support request for it, so that they know the problem exists. .

JulieT
Level 3 ●●●
Forum|alt.badge.img+10
  • Level 3 ●●●
  • 61 replies
  • December 29, 2017
This is still consistently happening, especially when I am editing embedded data in the survey flow. I put in a formal Support request today. Although I'm guessing they have a pile of tickets already. ;)

2baprogrammer
Level 2 ●●
Forum|alt.badge.img
  • Level 2 ●●
  • 11 replies
  • January 17, 2018
I can also confirm this has happened before, and while working in survey flow. I've learned the hard way to save often, maybe every few lines or branches in survey flow, exit and search for the question to easily find my place in the flow again. However, it looks like an update might have been implemented that keeps your position in the flow. Which makes saving and closing much easier.

LibertyW
Level 3 ●●●
Forum|alt.badge.img+5
  • Level 3 ●●●
  • 95 replies
  • January 24, 2018
@RondaD I find that it will log me out if I try and do too much in survey flow without taking a moment to save, close out, and re-open it. So annoying but it is what it is. I also use Chrome.

  • 5 replies
  • October 13, 2019
This is horrible. It's 2019 now and this is still happening. I had a massively complex full factorial design that I finally completed in survey flow. Clicked 'save', got the 'your session timed out' message, and everything is gone. I have to spend a lot of time again getting it to where I left off. Problems like these shouldn't happen with a professional platform like this, or worse, take so long until they are solved.

  • 1 reply
  • October 18, 2019
I wholeheartedly agree with @dschreij. This should have been patched already. Having this issue with chrome in 2019!

Forum|alt.badge.img+6
  • Level 2 ●●
  • 34 replies
  • October 19, 2019
Happening to my users as well. SSO makes dealing with this easier, but it's still annoying for me as brand admin to have to reopen dashboards I've been monitoring before getting logged out for the umpteenth time during the day...

MsIreen
Level 5 ●●●●●
Forum|alt.badge.img+23
  • Level 5 ●●●●●
  • 456 replies
  • October 19, 2019
Happened to me also just another day. Pretty annoying... Using Chrome as well.

LibertyW
Level 3 ●●●
Forum|alt.badge.img+5
  • Level 3 ●●●
  • 95 replies
  • October 21, 2019
I'm beginning to notice this happening not just in the survey flow but in the quotas as well. I can be making/editing quotas and out of nowhere - BAM! Logged out and everything erased.

LaurenK
Former XM Community Team Member
Forum|alt.badge.img+13
  • Former XM Community Team Member
  • 900 replies
  • November 7, 2019
For anyone experiencing this, please reach out to our Support team so they may properly file this with our engineering team. Thanks!

bstrahin
Level 6 ●●●●●●
Forum|alt.badge.img+38
  • Level 6 ●●●●●●
  • 638 replies
  • November 8, 2019
I just had this happen to me too! I was actively making changes the whole time. Tried to do CTRL + s (out of habit from Microsoft crashing on me so much). I clicked Save Flow, got a message that my session timed out, and when I clicked back in so much of my work was lost. I am heartbroken. I didn't take any breaks and was constantly working :( Contacting support now like Lauren suggested

  • 1 reply
  • November 12, 2019
I've been having the issue too over the last month - using Chrome. I'm also getting emails from a few respondents saying their survey is timing out.

bstrahin
Level 6 ●●●●●●
Forum|alt.badge.img+38
  • Level 6 ●●●●●●
  • 638 replies
  • November 13, 2019
For anyone having these problems, I added a post to product ideas. It would be great if you can head over there, up vote, and talk about your experience so hopefully we can get this fixed! https://www.qualtrics.com/community/discussion/7030/better-saving-options-time-out-warnings

Forum|alt.badge.img+5
  • Level 3 ●●●
  • 204 replies
  • November 13, 2019
This happens to me almost daily, but I am usually in the survey editor instead of the Survey Flow. I'm using Google Chrome. I always have to go back and redo the last thing I did because it never saves.

bstrahin
Level 6 ●●●●●●
Forum|alt.badge.img+38
  • Level 6 ●●●●●●
  • 638 replies
  • November 13, 2019
> @uhrxx005 said: > This happens to me almost daily, but I am usually in the survey editor instead of the Survey Flow. I'm using Google Chrome. I always have to go back and redo the last thing I did because it never saves. When I am in Survey Editor on Chrome I can do a CTRL + s on my keyboard and I see in the top left hand corner that a save was forced. Have you tried that?