Survey Platform

I want to send a file at the end of every day that contains all the completed survey responses. The issue is my IT department won’t allow for sftp so I need some out of the box solution. I know I can send individual emails in a workflow with the survey response, but I don’t want people to be getting emails all day long. Is there a way to “batch” send the emails (either send a bunch of individual emails at once, OR preferably have it contain all the responses from that day). I’ve also been thinking about making a data table on a dashboard or report and exporting it that way. Open to any ideas!

Hello!Question type: Constant sumAnswer type: ChoicesStatements: 5The situation: I’m asking about household composition (i.e., how many people, including you, currently reside in your household?). I want respondents to answer for <5, 5-12, 13-15, 16-21, 21+. The problem: I need the total of the sum to be equal to or greater than 1. How do I do this?

Hello, I added a field to my XM directory contact list called WellRive Branch. I then went into my data set and added this as a field and added it as embedded data to my survey. I am trying to add display logic based on the WellRive Branch but when I get to the value there is nothing there. What am I doing wrong? 

I am trying to make a survey more user-friendly by having numbers users input show up as currency.Therefore, instead of 100000, it should appear U$ 100,000.Most of the solutions I have found or obtained can make the number change. However, they seem to struggle with Qualtrics internal validation/requirement mechanisms. JavaScript solutions that mask the number will end up having Qualtrics not recognize that the response has been entered. Likewise, number validations will not work even with masking.Does anyone have a solution that:Converts a raw typed number into currency; Lets Qualtrics recognize a response has been entered; Allows for validation (or at least only lets numbers be inputted) Starts from “,00”?

I have found several threads on mouse overs, but most of them are +5 years old, so I’m wondering if the provided solutions are still uptodate or if anything has changed in the meantime. What I want to do is:I have question text. when hovering over certain phrases of the question text, I want a tool tip to appear. The solution needs to work on desktop as well as mobile devices. Ideally, I’m looking for a solution that’s as easy/low-code as possible.Currently, I’m using the following approach described here: https://servicehub.ucdavis.edu/servicehub?id=ucd_kb_article&sysparm_article=KB0006562&spa=1&sys_id=c52ef409db10a4d098c6ac1b139619e7 This works ok-ish, but I have to make myself familiar with CSS in order to tweak the visual appearance, so maybe there’s an easier solution? Thanks!

Hi! I want to track if participants took part in a survey with their mobile device / a tablet / a desktop computer. I know I can add a hidden question with browser meta info. However, this tracks the user agent and other stuff, but isn’t aggregated in the way described above. So my question is how can I aggregate such info to get this broader info? I know from other platforms (like Decipher) that they automatically probvide this aggregated info. Is this also available on Qualtrics or is there maybe a matching list of browser user agents to devices?

I’m not sure if I’ve explained this as well as I could with the title … First we have our simple quota based on the country embedded data field, e.g. 50 respondents from UK (straightforward) But then in the survey we ask them about interactions with different groups: so 1 respondent might interact with X number of people from Y groups. So after completing the survey we might have: 1 UK responsethat covered3 people in Group A10 people in Group B2 people in Group C In addition to restricting UK responses to 50, can we also restrict UK-Group A to 80 people, UK-Group B to 150 people, etc (values are just for example)? So when a new survey session commences, I want to be able to check the complete dataset and see the current sum for the Group A embedded data field and check it is less than 80, and once it reaches 80 close the quota? And for extra complexity, can this work as a “least fill” ? Thanks!

Can anyone provide Custom CSS code to:Change the width of the survey. Add a border to the survey (the entire survey, not just a single question). Create a button for the “take survey” link.Thanks.

I’m trying to design a balanced within-subjects design using embedded data, but I’m struggling to make my design work.  Here’s a description of my study:IV1: Label type scenarios (Three labels: green, red, blue )  IV2: Target type scenarios (Nine targets: A, B, C, D, E, F, G, H, I) Each target is paired with each label: so i have Target red A, blue A, green A.Here’s a description of what I want my design to look like: each participant should see all 9 targets each participant should see each target once only (e.g., the target is a square. if they see the red square, they shouldn’t see the green or blue square) each participant should see three “green label”, three “red label”, and three “blue label” scenarios. for example: a participants might see the scenarios in this order: green A, blue B, red C, green D,  blue E, red F, blue G, green H, red I. In this example, there are  3 greens, 3 blues, 3 reds, but each letter appears once.my current embedded data looks something like this:red_c

Hi, I have a side by side question set up where there are 2 columns (one with 4 multi-select options and one with a text entry). Is there a way to validate one row as if it’s a single question and force respondent to select/type a response? Like if a respondent selected any of the first 4 options, the respondent is not required to type anything in the text field and vice versa.   

I need assistance in displaying the anchor labels from the screenshot above on a single line—for example, 'Very Good'—instead of splitting them across two lines, such as 'Very' on one line and 'Good' on the next.

I have mouse overs /hovers in my survey in a) question texts and b) response options. Now, for some of these, the mouseover/tooltip text itself should be based on meta data of my particpants. E.g. assume I’m doing an engagement survey and participants’ metadata has a data field called “business_unit” that stores, well, the business unit of each employee. Now, I sometimes have question texts or response options like “How do you rate your business unit?” or “My business unit is XYZ”. So when the participant hovers over the word “business unit” I want show the business unit based on what is stored in the particpant’s meta data. For the tool tip itself I was following this approach here: https://servicehub.ucdavis.edu/servicehub?id=ucd_kb_article&sysparm_article=KB0006562&spa=1&sys_id=c52ef409db10a4d098c6ac1b139619e7 and then in the survey for my specific question I’m going to the html view and was adding some code like:  How do you rate your <span data-text="${e://Field/bus

Hey everyone!I need to do a pilot test of my survey for my research. I am aware that when I import into SPSS Qualtrics separates between the preview answers and the ones which occured post survey activation. As I want to just test some things on my survey and I have no room for deleting active responses afterwards, I need to distribute it on preview to a short number of people for them to try it. But as I generate a link, everyone needs to sign in or log in to try it. If you know anyway to counter this, I would deeply appreciate it!Thanks a lot. 

Our course evaluation has been going for a week and we found out that a course is missing so can I manually add that to the course list?

Thanks to some help here in the community I was able to hide the “powered by Qualtrics” button that usually appears on each survey page at the lower right corner. I’m using the following JS code on the first question in each of my survey blocks: Qualtrics.SurveyEngine.addOnReady(function(){ /*Place your JavaScript here to run when the page is fully displayed*/ jQuery('#Plug').attr('style', 'display:none !important');});This works just fine. However, it unfortunately doesn’t work on the very last survey page, i.e. where the “end of survey” message appears because on that particular page there is no option to add JS code. Is there any other way I could hide that button?

Hello,I want to set up a matrx table set in carousel, and carry forward statements selected from a previous question. But since the statements are “carried forward”, I am not sure how to adjust the font settings, such as bolding the statements or increasing the font size. Could anyone please share the CSS code to help with this?Thanks!

Hi,I am trying to use below API to search for records in Directory :https://api.qualtrics.com/c79e78a949572-search-directory-contactsWhen I was trying out in documentation, single field filter works fine, but when I use below code for multiple criteria based on syntax they have provided I am getting an error :{"meta": {"httpStatus": "400 - Bad Request","error": {"errorMessage": "The provided simpleFilter syntax is invalid, please review all components before retrying the request","errorCode": "CFH_0.4"},  Below is the code that I am using in body: {"filter": {"conjunction": "and","filters": [{"comparison": "eq","filterType": "email","value": "aa@b.com"},{"comparison": "eq","filterType": "externaldatareference","value": "cc@b.com"}]}} What am I doing wrong ?

I have a multiple choice question in which multiple selections can be made. I want to make a separate rank order question in which the selected options from the multiple choice question can be ranked. Additionally, if only one selection is made, I don’t want the ranking question to appear at all. How would I go about doing this? Thank you!

Hi All,  I have a side by side RPT survey that I want to ask about their knowledge before a training and then knowledge after a training. Having researched it a bit in terms of format, I want to set the before likert on the left, the statements they are answering in the middle and the likert for after the training on the right. So, likert, statements, likert in a side by side. Currently I don’t see an option for moving the statements (they are on the left followed by two likert sections). Is there a work around? Much appreciated.

I went through the documentation of Location Experience Hub but I am still confused as to why do we even use it. Additionally I have the following 3 questions that I need answers to:1) Pros and cons of using location assist vs using dashboards2) ORM, TICKET, SURVEY ARE my DATA SOURCES - what are the pros and cons of each of these in location assist vs dashboards3) how we respond to orm reviews + survey tickets in the same area of the location assist.​​​​​​​​​​​​​​

Hello, I am trying to remove commas that are coming through piped text. The piped text is as following: You rated the following as "Good" or "Excellent":${q://QID33/ChoiceGroup/SelectedChoicesForAnswer/1}${q://QID33/ChoiceGroup/SelectedChoicesForAnswer/2} Please comment on why: On the respondent side, it is coming through like so: Does anyone know any JavaScript or other solution that will remove these commas? I would like to continue to use bullet points, so the commas will not work for this format.

Does someone knows if its posible to create tickets based on being a detractor on 3 surveys at the same time?the team that im woking in want to make tickets for a close the loop based on that description and i haven’t been able to find something similar to that

I am working on a project where the faculty wants to respondents to compare their response to Q1 to the Q1 responses already submitted before proceeding to Q2. I can prototype this by adding a text/graphic question on the page following Q1, piping their Q1 response and embedding an iFrame to a tiny Report (see attached screenshot). In this example, I’m piping the Q1 values into the column width to make it more responsive.That’s tolerable for an out-of-the-box solution, but the iframe is problematic for accessibility reasons. Also, it’s clearly a bit of a Frankenstein solution, even with pink and yellow lipstick on the pig.I played around with Results, trying to embed a public widget for this question instead, but the embed “code” is limited to the ID for the given widget. I’m guessing the only real approach for displaying the results on a survey page has to do with exporting the survey data elsewhere, then creating hooks to import it back as ED fields.Am I missing something?  Has anyon

I’m looking to get respondents to submit “the first word that comes to your mind” on a certain topic, and want to ensure they only submit 1 word. As part of this, I want to forbid respondents from entering any spaces in their answer. I tried using the custom validation to do this, but am not having any luck (tried putting a space in there, and an “s” after googling that may be the regex version of a space?).Does anyone know if custom CSS might be the solution here? And if so, what that code might look like? 

Hello, I am creating a survey and I am wondering if there is a possibility to generate an edit link (anonymous link with the Q_R=${rm://Field/ResponseID}&Q_R_DEL=1 part appended) in an e-mail sent by a workflow? This is because the survey will be copied several times with slight edits in the future. It will take less time for us if this could be automated somehow when new versions are made from a copy.Thank you!