Custom Code

I have Pick Group and Rank question containing two groups. I have validation turned on with “each group contains min 1 max 1”. I want the group box to prevent adding any additional choices after 1. Currently, the group box allows more than one choice and validates when the user clicks next. I want the validation to occur when the user tries to add the second choice to the group. I want the attempted choice to bounce back to the list rather than allowing it to be added to the group box. Is this possible?  

Hi everyone,I’m working with Qualtrics Site Intercept and running into a limitation with popup sizing that I haven’t been able to solve cleanly.The intercept loads a survey in an iframe with a fixed height. Since the survey has multiple pages with varying content (including display logic), this leads to either scrollbars or excess whitespace depending on the page.So far, I’ve tried a few approaches from the intercept side: Overriding CSS on the modal and iframe to allow auto height Forcing iframe height manually via JavaScript Triggering resize logic on intercept load Attempting to react to navigation events (e.g., Next button clicks) None of these worked reliably, mainly because the survey runs inside a cross-domain iframe, so I can’t access or measure the content height directly.Before I go down the route of implementing a postMessage solution between the

I would like my text entry question to automatically apply dashes “-” to a 10 digit phone number as the user is typing. The code I see across the community only seems to work for the older survey layouts and not the New Survey Experience / Simple layout. Does anyone have JavaScript to automatically apply dashes while entering in a phone number? The code needs to be able to work with a phone number content restriction and forced response settings as shown in the screenshot below.  

I'm currently making a survey that requires the respondents to answer multiple choice questions by choosing images. The survey has only 4 questions, and each has about 50 possible images as answers. Two of these images are randomly chosen and presented for the respondent to choose one. That was pretty easy to do, but I have a problem now: is there any way to insert the graphics as choices in a batch? I have 200 images in my library that need to go each into one choice, and I could not find a way to that all at once. I have to insert the graphics one by one, and not only is this time consuming, it is also prone to errors. Is there any way to do it automatically, even if "programatically"?Thanks in advance!

Hi everyone! I would like to collect some qualitative data (open-ended responses). Considering participants’ potential use of AI, we would like to use some code so that we can track whether participants use copy and paste for their answers? We are not trying to prevent participants from using copy and paste. Instead, we just would like to know whether participants use copy and paste or not!Thank you so much!

Hi  In the below screenshot and wording how can I reduce the spacing between these. I will share code also. ThanksSarahHow likely would you be to recommend your Insurance Company to family or friends?  Please rate on a scale from 0 to 10 with 0 being “Definitely would not recommend them" and 10 being "Definitely would recommend them".    

Hi All, In the Advanced Transform task (where you can write a python script) to manipulate the data, I would like to know how, like the code task, you can return a value or string that is available to use in a later tasks.  All the help (and bots!) say it’s possible using something like return { summary: summary_text } but this needs to be wrapped in a function() I believe. The other option is to use something like #print(SUMMARY=summary_text) This get’s to the log, which is a downloadable file but I’d like to pass this into the proceeding email task.  Every variants I’ve tried still won’t show it up in the piped text dropdown. Is this possible? Thanks Rod PestellPS there is no ‘Advanced Transform Task’ tag so had to select ‘Task’!

I am trying to make Qualtrics work via Tealium.I managed to make it work both via Tag and Extension separately.But via Tag I had to create a base_url UDO variable and replace it with the url in the template by mapping the variable, instead of the tag just being configurable (by adding survey id and site intercept server. Is there any better way to handle this? Or do I just make changes to the base_url in the template? Is there a way by which I can create a lookup table or something in Tealium which will load a particular Qualtrics survey based on the url and survey combination. The objective is that I want to create sort of like 1 Qualtrics code and a configuration which is scalable. Which one should I use, if I want to scale, tag or extension? Anyone who has done this via Tealium, any best practices or recommendations?

Hello, how can I apply alternating gray and white to the baseline, mid-year and year-end columns? I found a lot of questions for matrix, but not much for a basic table created using rich content editor. Thank you! 

Hi,In my survey, I have the calendar-type questions so participants can enter their date of birth. I would like to be able to calculate age from this entry. I need the participants' ages to apply branch logic, as different age groups require different sets of questions. I have tried multiple times using Javascript in the calendar question, adding embedded date in my survey flow and them adding branch logic based off the embedded (‘age’) but nothing seems to work. Any suggestions?Thanks for your help! 

Hello,I am trying to pipe 2nd and 3rd rank options from a ranking question but it is not working through native options. Have tried to apply JavaScript custom code but that too is not piping the text. Below is the code. It would be help if there can be some solution on this requirement.<script>/* captureRanks v2.x Captures ranked choice labels and recodes from Qualtrics Rank Order questions and stores them in Embedded Data for piping. Usage: In the questions JavaScript   captureRanks(this, { prefix: "QID38" });*/function captureRanks(q, options) {  options = options || {};  var prefix = options.prefix || q.questionId;  var choices = q.getChoices();  var answers = q.getAnswers();  var ranks = [];  // Build array of {choiceId, rank}  for (var c in choices) {    var rank = q.getChoiceValue(c);    if (rank && rank !== "") {      ranks.push({

Hello Qualtrics team! We’re working in the layout of a ‘Multiple choice’ question and we want to be sure it’s correctly displayed.It consists on a  'aidedBrandAwareness' question and The works similarly to the industry standard for this 'aided Awareness' KPI: we prompt the respondent with our brand alongside the rest of the competitors (name and logo) so they can select those they recognise. For instance:Based on the survey design, only four brands (3 in the mobile phone

We are looking to use a MaxDiff question to test images of new products. The graphics look fine size wise in the Library and in the desktop preview, but are incredibly small on the mobile preview. Is there an effective way to increase the size for mobile for a MaxDiff block?The MaxDiff appears to lack the size adjustments one can make within a standard multiple choice or ranker question.

Hi, I have added the custom code found on a community post to a question in Qualtrics. The code displays a pop-up message asking participants not to leave the survey screen. The code works well when a participant clicks into the search bar or opens a new tab in the same window. However, if they leave the window (by clicking on the desktop for example), the code glitches quite heavily. Specifically, when they return to the survey screen, the pop-up message continuously pops on and off and the participant can’t interact with the survey. This happened for one test participant using Safari and another test participant using Chrome. However, a 3rd test participant using Chrome said it worked fine. Is there anyway to update the code below to avoid this bug? Thank you! Qualtrics.SurveyEngine.addOnload(function() {    // Requires 'leaveCount' Embedded Data field initialized in Survey Flow    let count = parseInt(Qualtrics.SurveyEngine.getEmbeddedData('leaveCount'))

Hi Qualtrics Community, I have a matrix table question where each row label is formatted as “Name1 vs Name2” ( these names are piped data from previous participants responses. For each pair, I have two text entry values from different questions:${q://QID20/ChoiceTextEntryValue/1} (and up to 10 for QID20) ${q://QID11/ChoiceTextEntryValue/1} (and up to 10 for QID11)But participants don't need to  mention all 10 names for each question. I want to use JavaScript to hide a matrix row if both or one of corresponding text entry values (for Name1 or  Name2) are not present (i.e., empty).Can anyone create a code for this, struggling to make it work?  Thank you! 

Newbie here…I have a matrix table question of bipolar type with one statement and 9 scale points. The scale points have no text but there are 5 graphics. Graphics are attached to scale points 1, 3, 5, 7, and 9. Each graphic is 141 px W x 174 px H. My understanding is that Qualtrics fits the graphics into the standard width of the output screen, which renders as below.  The graphics have been scaled down to approximately 55% of original size so they fit, and pixelation now makes it difficult to distinguish between them. I then added in Look and Feel > Style > Custom CSS:img { max-width: 200% !important; }With this change the screen renders as below. The gra

It appears Qualtrics has included it’s own Calendar Question Type. Yay!However, it looks like it also includes a time-interval formatting feature where people HAVE to pick a time. Currently there is not an option to exclude this.I contacted Support and they said maybe there is someone in the community that can recommend code to get rid of it.Would love some help. Thank you!

Hi All, If i have an 5 pt rating overall satisfaction question Q1, then Q2 is a grid question with 80 statements. Is there a way  to stop them proceed  to next page  if Q1 selected 4 or 5 and  Q2  all selected 1 or 2 or 3 ?  until respondent provide logic answer. 

Hi everyone,I’m trying to reduce the vertical space between two specific questions in a branded theme survey.I only want the spacing reduced for one question (not globally via Look & Feel).Has anyone implemented a reliable way to reduce spacing between two specific questions using JavaScript (without affecting the entire survey)?Any guidance would be greatly appreciated. ​@vgayraud   

Hi Team, We plan to add custom code in After display of Intercept and require information like SurveyId and Response Id in custom code. Is there any way of getting this info in Intercept.  Thanks Team for helping with this. 

I am looking for a way to set up a question that is more UX testing functionality like this. Where the cost dynamically changes when I select a coverage length. Could anyone point me in a direction if this is even possible and how? Thank you! Question Text: Cost [$#.##] per month[Basically code to say if 3 years is selected show $5, if 5 years is selected show $7, if 7 years is selected show $9]Choose your length of coverage:Choices:3 years5 years7 years

Hi all,I am using piped text from a multiselect multiple choice question. Currently, different choices are piped in separated by a comma. Is there a way to display the selected choices in a bulleted list? This is how it's looking now:Thanks in advance!

We’re seeing a breaking change in Qualtrics’ New Survey Taking Experience related to embedded data length limits and are looking for guidance or confirmation from Qualtrics staff or others who’ve hit this.Use caseWe deliver JavaScript/TypeScript-based cognitive assessments via Qualtrics. Each assessment produces JSON (trial-level + scoring data) that we store in embedded data fields. These values commonly exceed 1,000 characters but remain well under the documented 20KB embedded data limit.DocumentationQualtrics docs state:“Each value of an embedded data field should never exceed 20KB (20,000 bytes).”https://www.qualtrics.com/support/survey-platform/survey-module/survey-flow/sta

Hi, I’ve got a matrix type multiple text entry style question. The question deals with quite large numbers so I would like to insert commas preceding every third digit e.g 1000000 => 1,000,000. I’ve got the following code:Qualtrics.SurveyEngine.addOnReady(function(){    /*Place your JavaScript here to run when the page is fully displayed*/     const questionInputs = this.getQuestionContainer().querySelectorAll('input[type="text"]');         questionInputs.forEach(inputBox => {             inputBox.addEventListener("input", function (event) {             var inputVal = this.value             let num = inputVal.replace(/,/gi, "")             let numWithCommas = num.replace(/\d(?=(?:\d{3})+$)/g, '$&,');              this.value = numWithCommas            })        })}); This seems to work fine on the old survey builder but seems to have issues on the new ex

Good morning all,Has anyone used Royal Mail address checker (AddressNow/Postcode Anywhere) into a Qualtrics survey using JavaScript to call the Royal Mail API within a text entry question? Thank you.Glenn