Survey Platform

Hello, in my study, if the sliders are marked as 50, the participants are paid 100 ECU. The income obtained from the sliders is called labor income. I used an embedded data and JS code to make this calculation. However, sometimes the slider income is calculated and sometimes it is not. What could be the reason for this?

Hi there,I am creating a survey for a 4x4x2 within-subjects design whereEach question is a different vignette.  There are 32 vignettes total, since there are 32 possible combinations of the levels of the three variables. Only one sentence in each vignette is systematically varied to display one of the 32 combinations. The rest of the vignette is regular text (this text is also different in each vignette, since each vignette is different, but it is not systematically varied or being looked at as a variable). The vignettes themselves are not presented in random order. The systematically varied sentence in each vignette is displayed in random order. Each participant needs to see each of the 32 possible combinations, and not see any of the same combinations twice (non-repetition).I have been scouring the forum and have found similar posts but not exactly right for what I need. So far I have used embedded data and the survey randomizer for this design. Right now the vignettes are being gene

Hi, I know that at "end of survey," there is an option to display response summary. But, is it possible for survey takers to go back to make changes or edit responses to their surveys, after they have a chance to see their responses? I spent a lot of time, and can't seem to find answers. When the survey displays response summary, it just ends there, and the survey is recorded and completed. But, I would like the responders to have a chance to correct/edit after they see their responses. Please help! Thanks in advance!

Hi, I would like to set dynamic default choices for my form field question with multiple text boxes. The text will be embedded from a another survey.

I selected a date question from Qualtrics Library. Even after selecting or typing the date, the calendar still appears. How can we remove it if a date has been entered or selected by the user?   

Hi there,I have 15 photos of women, 15 photos of men, and 30 sentences describing actions. I need to create randomized pairs where a photo is displayed with a sentence below it, and participants will evaluate the person depicted using a Likert scale. Participants must see all 30 pairs. The problem is that if the photo is of a woman, the sentence needs to be adapted to the female version (e.g., "She brushes her teeth every night"), and if the photo is of a man, the sentence needs to be adapted to the male version (e.g., "He brushes his teeth every night"). Each sentence can only appear once — either in the female or male version, but not both.Participants should not see any repeated photos or sentences. I want the pairs to be randomized so that any photo can be paired with any sentence from the set. Additionally, I need to record which photo and sentence were shown for each evaluation in the dataset.What approach can I use to achieve this?

Hello, I want to design a study on qualtrics. Participants earn some income in the previous stages. Then they have to spend by choosing from the spending options provided. However, what I want to do is to make sure that they cannot spend more than the net income they have. I tried validation to do this, but it didn't work. I think I need to use JS code for this. Can anyone help with this?Thanks in advance.Best.

I’m having a devil of a time getting Qualtrics engineers to engage on a non-functional Vanity URL setup.  Is anyone else having a similar issue & if so, may we coordinate? Right now, my institution can’t really use Qualtrics Surveys properly. I know that research and assessment uses will quickly stack up & you’d think a situation where the product isn’t working - would get more attention. 🤷🏼History: I started a ticket in November when our Vanity URL setup failed.  There was robust discussion between someone within Qualtrics & my Sysadmin (all passed through me and another local Qualtrics Admin) that was mostly a repetition of Qualtrics saying “do this...”  with the reply from my sysadmin “yes, I did that, here’s the error..”   And a return from Qualtrics that was basically “do this… “  (over & over.)Largely due to December outages, the ticket then languished in that no-solution land - and was closed without resolution.  I began again in January .. with a 2 hour tech s

Hi, I have two surveys set up for longitudinal research. I successfully created and link two surveys, survey A captures data and saves to contact list. survey B uses authenticator to retrieve data from contact list where I have default choices in survey B the original answers submitted in survey A. The issue I have is when a user takes survey B and updates a response the embedded data is updated but if I were to take survey B again, I would expect the default choices to update to the updated embedded data. However, it keeps the choices from the initial submission in survey A

Hello everyone,I am trying to hide the question number for a specific question in my Qualtrics survey. I've tried setting the question number to blank, but it still shows a dot (.) when taking the survey. I also tried using custom CSS with the following selectors:#QID49 .q-number { display: none !important;}However, it didn’t work as expected. After inspecting the question, I found that the ID displayed is QR~QID49~SDPVALIDATION, and the QuestionText BorderColor is part of the class.Has anyone encountered a similar issue? What’s the correct CSS to completely hide the question number for QID49 in my survey?

How can we implement quotas in Qualtrics to ensure that a specific loop and merge item, such as "Red," is fully utilized in the survey 100 times?For example:We ask participants to choose their favorite colors in the rainbow (multi-choice). A follow-up looping question is presented based on the selected colors, such as:"What is your favorite shape for [COLOR]?"Options: Circle, Triangle, Rectangle, Hexagon, Heptagon.If we set a quota for "Red" at 100:100 participants select Red, but 63 of them also select another color. Due to the randomization of the loop, only 30 of those 63 are asked about "Red" in the looping question. In total, only 67 participants are asked about "Red," leaving a gap of 33 from the quota, even though the quota for Red is marked as "full."How can we structure the survey or quotas to ensure that Red gets fully processed 100 times through the loop and merge, rather than just being selected as part of the multi-choice question?

Hi, I have a survey that users are intended to access over a course of several months before submitting it. I want to track within the survey the date/time certain pages in the survey were viewed. I tried this Java script on an item, and also added a “DateMod1” embedded variable to the top of the survey: Qualtrics.SurveyEngine.addOnLoad(function(){/*Place your JavaScript here to run when the page is fully displayed*/    var curDate = "${date://CurrentDate/m%2Fd%2FY}";    Qualtrics.SurveyEngine.setEmbeddedData('DateMod1', curDate);}); The embedded variable stays blank though even after passing that item/page. How do I fix this?

I have created a survey that is designed to allow the user to send attendance update for their classes. For security purposes, we updated it once it went live for the term so that the referral URL requires the survey to be accessed from our password protected faculty/staff portal. I had initially ended the survey with the option to begin the survey again in case the faculty needed to submit updates for multiple class sessions, which I did by using a custom end of survey if they selected “Yes, I have another update” on the final survey question. That end of survey was a redirect link back to the first page of the survey, carrying over some embedded data elements to pipe in so faculty would not need to re-enter the same information twice. Adding the referral URL seems to have broken this.Does Qualtrics have a way to allow multiple referral URLS, or is there a cleaner way within the survey flow to accomplish this same goal? Thanks for any input you may have.  

Hi allI need a list of contact IDs for the surveys, and I cannot find them anywhere. Following the support article, but nothing is there.Checked also another post, how long the “switch to the older version” will be available? this is a bit of a bummer tbh 

Hi have 15 images and I want each survey respondent to see 10 of these images randomly and for each image they answer the same 2 questions. Whats the best way to set this up without repeating?This is an example for what I need image 1 q1. Do you like this?q2. Would you buy this? image 2q1. Do you like this?q2. Would you buy this? this repeated 10 times but images chosen randomly from a bank of 15 images. 

Hi -Every quarter I report survey usage (based on responses) and charge each division a percent based on the number of their responses to the overall responses collected. Instead of exporting the list, and then matching the person who built the survey to the corresponding division, I’m wondering if I can assign the survey to a division in Qualtrics.Is it possible to do this without limiting access/views etc. to the surveys once they’re moved to a division? I don’t want to break anything, just make reporting a bit easier. Thanks!Sara

I have a Results page with a number of (nearly identical) widgets. The only difference between them is the filter, where I filter each one so that it only shows respondents results from a certain demographic.I also have a filter for these entire page, so that it only shows results from the past week. This means that sometimes, some of the widgets have no results to display, because that specific demographic has not obtained results in the past week.Is there a way, then, to not even display the widgets without results? Is this possible within the Results part of a Survey? Do I need to migrate the page to a Report Page? Any help is much appreciated.

Hey!I am conducting a Van Westendorp Pricing Study on the platform, and when someone answers the four questions regarding what they consider "cheap," "ideal," "expensive," and "too expensive" without logic (for example, the "too expensive" value being lower than the "cheap" value), a message appears asking them to use the Back Button and re-enter the information. However, the Back Button option does not appear (please see the screenshot attached), only the Next button. Could you please help with this? Thanksss  

I‘ve been able to create a custom slider image using the javascript below, but it only renders in the same size as the original qualtrics slider image. Is there a way to customise the image size that is displayed when the survey runs?Or is there another way to make a full sized image change when a user moves a slider underneath it?Thanks in anticipation Qualtrics.SurveyEngine.addOnload(function(){    /*Place your JavaScript here to run when the page loads*/        });Qualtrics.SurveyEngine.addOnReady(function(){    var imgs = jQuery("#"+this.questionId+" div.SSImage > div.SSImage");imgs[0].style.background = "url(https://aruspsych.eu.qualtrics.com/ControlPanel/Graphic.php?IM=IM_3DqVvahlCICMbY3) no-repeat";    var imgs = jQuery("#"+this.questionId+" div.SSImage > div.SSImage");imgs[1].style.background = "url(https://aruspsych.eu.qualtrics.com/ControlPanel/Graphic.php?IM=IM_VITYBA7atozuYkv) no-repeat";        var imgs = jQuery("#"+this.questionId+" div.SSImage > div.SSImage");im

When the customer is browsing we have the site history. I would like to be able to put a condition on the site history so that when the customer has been on a certain section of the website that we can add an additional question in the survey. But I don't see how this can be done because the URL is quite long in many cases. How can I split that up so I can then use that to set up a conction

Hi community,I’m wondering whether anyone might be able to help with something I’ve been trying to figure out in Qualtrics for a little while. I'm running a study where I need to direct participants based on their support or opposition to a policy. Basically, I want to recruit a larger number of participants (e.g., 100 at a time) and always send 2 people who support a policy and 2 people who oppose a policy to a specific page (where they enter an external chat). The next set of 2+2 people would then be sent to another page and so on.I've tried setting quota but apparently responses aren't counted towards the quota until they are submitted. The only option I can see is having a shorter survey first that assesses whether participants support or oppose the policy, setting quota and then branching depending on the quota to a range of follow-up surveys (with the specific page). I'd rather avoid having to create about 25 surveys and having to merge the datasets etc. Just wondering if anyone

Sometimes when I have a question I contact the customer support. If the answer is “Sorry, this is not an option right now” I ask them whether they can forward this as a suggestion to the relevant Qualtrics team. However, they just tell me to post the suggestion here as they say there is nothing they can do, which I find strange. It means more work for the customer. Customer support that tells customers to do the work seems strange. So, please do empower customer support staff to forward suggestions from customers.

Hi all,I'm working on a survey where I need to calculate the sum of three numeric values entered in a matrix question and store the result in an embedded data field. Here's the scenario:The matrix question ID is QID16, and I want to sum the numeric entry values from: Row 12, Column 1: ${q://QID16/ChoiceNumericEntryValue/12/1} Row 17, Column 1: ${q://QID16/ChoiceNumericEntryValue/17/1} Row 18, Column 1: ${q://QID16/ChoiceNumericEntryValue/18/1} I've added an embedded data field named Q11_Total in the Survey Flow, where I'm using the following formula:Q11_Total = ${q://QID16/ChoiceNumericEntryValue/12/1} + ${q://QID16/ChoiceNumericEntryValue/17/1} + ${q://QID16/ChoiceNumericEntryValue/18/1}However, the result always shows 0 in the embedded data field, even when valid values are entered in the matrix question.Could anyone help me identify what I might be doing wrong? Is there a specific format I need to follow, or do I need to enable something else for this to work?Thanks in advance for

Hi everyone, I’m working on my first project in Qualtrics and need some help programming a setup where: I have 24 unique jokes that need to be displayed randomly. Im not sure how these need to be attached or stored in the project. The jokes are to be told by 8 different cartoon avatars (graphics) and each will be rated via a sliding scale (1-100) Each avatar will “tell” a set of 3 jokes, displayed in a two cell table : the avatar graphic in the left cell and the joke text in the right cell. All 24 jokes must be used, at random and none can repeat. I’m not sure if I should use a randomizer or a piping function to achieve this setup, or if there’s a better way to handle it. I’d love advice on the best approach and any specific steps or code I might need to implement this. Please remember I am very new at this so layman’s terms would be much appreciated. :) Thanks in advance! Evan

I've been given "Brand Administrator" authorization to our live instance of Qualtrics. However, I can only see a survey after it's either collaborated with me or distributed. As an admin, I'd like to see all surveys (in draft, active, inactive, etc.) in the instance. What authorization would I require?Please assist. Thanks in advance!