Solved

Hello, I am wondering if it would be possible to create a question like the image below on Qualtrics. I need to embed two drop-down lists (gray boxes in the image) in a question so that participants can select an answer from each list to complete the question. Any suggestion would be greatly appreciated. Thank you! !

Hi all I have a questionnaire with 4 blocks with 3 questions in each block. The 2nd question in each block should contain 1 out of 4 mp3 audio. I wish to be able to randomize only the mp3 audio between the blocks in a way that each mp3 file will be played only once. (unfortunately randomizing the blocks doesn't work for me) Any suggestions? Thanks in advance, Ran

Hello, I have a survey with 8 questions on the same page and I am asking the participant to write an overall minimum of 300 words. I have learned how to put a word count for one question, but I would actually like an overall word count that counts all the words in all 8 questions. This way a participant will know if they have reached 300 words for the 8 questions. Is that possible?

Hello - I have my survey set to send a custom email thank you at survey completion. Is there a way to change the subject of the email dependent on the language of the participant either as labeled in contacts, as a choice in the survey, or as an embedded data variable? This is possible in email distribution (choose translated subject), but doesn't not seem to be easily available when sending a thank you email. The message of the email defaults to title of the message in the message library. Thanks!

The representation of the survey on the desktop looks strangely narrow. How can I change the way the survey is displayed so that I use the entire screen width?

Has anyone else noticed any issues with their advanced reports not displaying breakout percentages? I have several advanced reports set up that were working just fine prior to last week, but now my percentages are not displaying. If anyone knows of a work-around that would be great! !

Hi guys, is it possible to add a Research Core survey as a EX dashboard source? We have run one of our Pulses there, but it would be nice to have its results showing in the main EX dashboard, as we have had some of the same questions there. I can see the survey in the list of sources for selection. However, when I select it, i receive the following error: Unable to add source: due to error: 404 NOT_FOUND

Hi, How do I change login information of the EE participants of the existing and running Engagement survey? Can I just reupload the participants list? Another thing is whether it is possible to combine the participant into already existing user? We have a couple of employees that came from another company. We have created their user accounts with our company email for the login via SSO purposes. However, they were added to the EE survey with login information from their previous company. When I try to manually modify their login details in the EE project, the changes are not saved.

Hi there, I have utilised the 'randomised survey flow' technique to randomise my participants to four different 'blocks'. In terms of viewing the data in the data analysis tab, how can I view these blocks separately? Thanks!

Hi, I had participants to choose from the list three topics to talk about. Then I want to pipe the selected topics separately into the following questions. The basic question-pipe function only allows pipe in three selected answers altogether. I tried loop & merge, and it seems it only pipes in the first selected answer. Any suggestions are appreciated! ! !

I am creating a 360 for one subject. Every time I upload the evaluators, the system automatically assumes they are subjects. I do not want them to self evaluate, and don't want them to receive subject reminders, etc. In short, this is a small project with one subject and 19 evaluators. Only the subject should self evaluate. I followed the instructions in Help to create my CSV file. What am I doing wrong?

Hi guys, I'm trying to figure out how to pull all the distributions for my survey at once. List Distribution only pulls 100 at a time and has an offset. I'd like to just pull it all at once rather than offsetting 9-10 times. Any help is much appreciated.

Has anyone had any issues with Qualtrics platform acting out? It has been doing weird staff for me. For example, I open one survey, the name on top, but the questions are actually another survey. The problem disappears only when I restart the computer. Was contacting Support, but when they log in, everything works just fine for them. It is working fine for me for now, so i am patiently waiting for it to reappear, so I can send the screenshot to the support. Meanwhile I am asking for advise here :)

I have tried for several days now to set up the branch logic for several questions. For some reason, I must not be interpreting the Branch Logic Qualtrics Support guide correctly. None of my branches are branching! It appears that the syntax that I am using is having no effect. The questionnaire does not advance. I have coded software before, so the concept of branching is not new to me. However, I do not seem to be getting the hang of Qualtrics' branch logic. Any help you can provide will be appreciated. An example of would be appreciated. The one in the guide does not seem to provide the information that I need. I am trying to complete the questionnaire by January 10.

My Qualtrics survey view blocks are not in sync with survey flow. In the survey view, Questionnaire block "Section 4--Part A--Background" mysteriously follows the "Start Here" block. I did not place the Section 4 block there. In the survey flow, the block is in its proper place. When I tried to move the whole block in survey view it would not budge. When I tried to select all of the questions within the block and then move all of the questions at one time they replicated themselves. The result was that I had several copies of the Section 4 block. My questionnaire is long. It has 65 questions and about 8 blocks. Could the length of the questions be causing block moving problem? Either way, how do I move the Section 4 block from the beginning of the questionnaire to the end of it? Also, about two days ago the questionnaire abruptly closed. Could the length of the questionnaire have caused that to happen?

I am relatively new to Qualtrics and have recently created a survey. This has been sent out to various countries so now I am looking to translate the feedback to English. I have figured out how to do this but when exporting the data, the feedback seems to go back to it's original language. Please can I have some advice on this? Kind regards, Lauren

I was hoping that, like tango integration, there would be a way to integrate Venmo in a way that triggers a venmo charge to a particular account when a participant finishes a survey. I am very new to qualtrics, so any help would be very much appreciated!

! I am hoping someone can help me with the CSS code to change the color of this matrix table options to grey (instead of green). All other questions type are the correct color, but I can't seem to find the lines of CSS code I need to change these colors. I appreciate any support! Erik

Hi - Sorry if this is elsewhere. I'm getting some respondents emailing me to say that the survey isn't accepting their @gmail email addresses. I'm asking for emails via the "form" format question. Then in the option tabs for the email line, I had selected "Validation: Valid email address". This is an option *within* the question, and I hadn't set any validation on the toolbar on the right (outside the question in the survey builder, if that makes sense). Is there any reason why these settings would prevent particular domain names being accepted? For now I've turned off validation on this line until I find a fix. Thank you :)

Hi to everybody, I never used Javascript but I think I will need it here. Briefly, I'm going to ask in a survey the date of the test and the birthday and then what I would like to do is: * calculate the age in years, month and day at the date of the test; * check if the age is between age1 and age2 as needed; * put a warning that says that the person should be between age1 and age2. Is it possible?

I have the following side-by-side table. Is it possible to only show the 'Total nights' column if the user selects overnight stay? I'm aware I can add custom validation but was hoping there would be some javascript code that could do this? !

Hi all, I have a multiple choice question, and one of the choices has a picture on it. My participants asked me if it is possible for them to zoom the picture. I would like to ask if there is any function that I can do in Qualtrics, so the participants can zoom the picture during the completion of the questionnaire. Thank you.

Hey everyone! I have a question about custom validations. I have a matrix table that the user can answer, or alternatively, he can check a checkbox to say he doesn't wish to answer. How can I validate this kind of behavior? I added a screenshot below. ! Thanks for your attention! Robin

I created a scheduling survey for employees to set their schedules for the semester. After they finish the survey, they receive an email with a copy of their response and a link that will allow them to retake the survey to change their selected shifts. Each shift has a quota. I realized that when someone retakes the survey and removes a shift, the associated quota is not decremented. Is there any way to decrement quotas automatically so I don't have to constantly view reports and manually adjust the quota count?

Is there a simpler way to 'group' responses together than creating a variable? I need to do this for several scale questions.