Survey Platform

Hi, I’m having some trouble with randomization and display of images in a sequence of questions. I made the attached diagram to lay out what I’m trying to do. Basically, I would like to randomly select three images from a set of six (defined in embedded data) and then display those images one at a time in three separate questions, randomly displaying those images (without repeating any) but not randomizing the questions. Any help would be appreciated, thanks.

Hi Community.  Suspect (hope) this will be an easy solve for some of you.  I’m struggling so would greatly appreciate the help. I'm putting together a survey for dog owners.  Part of the survey allows them to answer a set of questions for each of their dogs (ie. if they have 4 dogs they would answer those set of questions 4 different times).  Recognizing that people may have more dogs than they are willing to answer questions about, I want the survey to randomly select which of the dogs they answer questions about first, second, and so on.  This will mean I’ll need the respondent to provide the names of their dogs so the survey can prompt them as to which dog to answer the questions about.  I also want them to be able to exit that part of the survey after answering for a specific dog (e.g., have 4 dogs but completed the survey for 3 and would like to move on).  Here’s what I’ve done and where I’m running into problems.I asked how many dogs they have and have stored this as embedded dat

Hi all, I am facing an issue when I try in my survey to use a brand theme. Everything, I mean both the survey option and theme are set to use in the “new experience,” however when I made a survey preview, it seems that my custom brand theme is not taken into account.Do you have any idea about the issue. ThanksRomain B 

Qualtrics offers to customize the “end of survey” page bei either showing a custom message OR by showing a response summary. However, I do not see any option to show the “response summary” page and at the same time customize the message that’s shown on that page. What can I do? … 

Is it possible to enable survey sections in stages, like the survey is in 2 parts but we only want the second part to be available at a later date in the future? We would like to run a survey where the first section is a “screener” which will be open to all for X days and only after X days have passed do we want the second section to be available at which point we will recontact the participants to take the 2nd stage of the survey. We want this to be in one survey because we will pipe in responses from the screener section into the main section. My first thought was to try and disable the next button based on an embedded data field and then see if we can update the embedded data field value via a URL parameter or in the contact list part way through but it didn’t seem to work for me. Has anyone done anything like this before, or does anyone know whether this can be achieved? Thanks! 

I have been using the attached layout for years, however, it is no longer available in “Look and Feel.” I manage to keep using it by copying old surveys, but I would like to know if there is a way to apply it to a new survey that I want to develop from scratch and/or whether I can apply it to other surveys that currently have a different layout. Thanks!

QUESTION:We want to calculate the total number of correct answers by recoding responses as 1 for correct and 0 for incorrect. But is there a way to still keep the participants’ original responses too, not just the recoded scores? We know that in Excel, we can download either the recoded values or the original answer labels, but we’re trying to avoid managing two separate downloads. For the rest of our data, we use participants’ actual answers, so we’re hoping there’s a way to get both the original responses and the sum of correct answers in one export. Is that possible?

Hello XM Community!We are running an ongoing evaluation form and created a survey project that will be sent to multiple people within a predefined distribution list saved in our XM directory.  Each invitation will go to 5 or 6 recipients via email with unique survey links, which will be manually triggered from the project’s distribution tab.  Once the first person has fully completed the survey, I want to prevent responses for any other recipients of that particular distribution.  Is this possible? I don’t want to prevent multiple responses specific to the survey, because it will be used continually.  Additionally, we will send invitations to the same distribution list on an ongoing basis.  So, I’m looking to prevent multiple response specific to each distribution.   Look forward to any advice on how to set this up.

I’m creating a survey where I am disseminating it via various platforms - face to face and via online social media platforms. The eligible participants can only answer the survey once. I found some solutions which required me to put in an authenticator and then a workflow. The workflow is set up such that each time a survey response is sent, data will be extracted to upload to the contact directory automatically. This is so that there is an external data reference to determine if the contact number has been input before. Authenticator in the survey first asks participant to enter their contact number. If the contact number is in the contact list, then participants will be told that they are not eligible for the survey. Now, I am sure that I have set up the authenticator correctly. I am just not sure how I can correctly extract the data from the survey to the contacts directory. Currently, what i did was trigger based on even when survey response is received or updated extract responses

I have a survey built which will be going out via anonymous link. We will not be collecting any identifiable data. Because the survey will be distributed by many participating organizations - we know that there will likely be overlap in respondents. To prevent duplicate responses - we are working on setting up an email authenticator which (when programmed correctly) will ask for an email - add that email to a directory through workflow at the completion of the survey and then use that directory as a source for the authenticator - not allowing someone who has been added to the directory (by completing the survey) to start the survey again.However - the survey currently is not allowing anyone to move past the email input - immediately displaying a ‘Unable to log in with the information provided.’ error message (even in incognito mode). I checked the directory and it is not adding emails there either. Please help!-Marta 

Hi all,I am trying to figure out how to disqualify the participants by duration.My survey is designed for 30 mins.It’s a paid survey. Distribution is handled by third party recruitment agency.I am trying to disqualify the participants if duration is less than 15 mins at the end of the survey.I set the branch > End survey (condition - Duration < 900)I didn’t set the embedded - “Duration” at the start of the survey flow since I believe it’s default embedded data.Please see screenshot of my flow. Thank you for help. 

Hi everyone!I have a Workflow with a Code Task that was running fine this morning.But now I am getting an error: “SyntaxError: Invalid or unexpected token”I don’t think it is related to my code because it works with another workflow. Any idea how I can fix it?   

I have a constant sum table where the last option is an “Other” option with an other text option. How can I hide this when then input value for the “other” option is 0 or empty, and also force a response when other is greater than 0? Is this even possible?  I can manage to hide it by default when opening the page with getElementById, but I’ve no idea how to then show it once a value for other is provided and also hide it again if the other value is removed. Thanks!

Hello,I am looking for CSS to hide the language selection button after the first page. Before the New Survey Experience I could use this CSS to hide the button:  .#Q_lang {display:none;} and this Javascript to show it on my first page  Qualtrics.SurveyEngine.addOnload(function(){ jQuery("#Q_lang").show();    /*Place your JavaScript here to run when the page loads*/});

Hi,I have created a survey that was available to anyone, but respondents(students) were sent an email. On landing on the platform they are required to input their student ID to log on to the system. Which has worked perfectly. The response rate is not as high as we hoped, and the QR code had now been published and being used. However those student who have answered the survey via the QR are still being sent an email reminder to complete the survey. Is there a way to stop this from happening? Thanks 

Hello, I created ticket tasks a while back and all was functioning as it should. At some point, someone changed one of the names in the dataset from “Consultant” to “Relocation Consultant”. I was able to get that fixed and all of the ticket tasks are populating that field correctly from the point of correction but not prior to.Also, I am now missing data in other fields such as Last name and first name. The data is still appearing in the customer profile but is not displaying first and last names as columns in my ticket dashboard.I have gaps in my data that I need to fix and I am not able to figure out how to do this. Any help would be greatly appreciated. 

I used the following JS code to add heading to the statements column in a matrix table question since there is no native function. However, I will be translating the survey into multiple language. Is there any way using the Q_lang variable to show the heading according to the language selected? jQuery("#"+this.questionId+" td.c1:first").html("Label Text");  

I am showing response summary at end of survey. In this response summary I want to hide one question always, can someone check if this can be done and how? 

Client is using Qualtrics.  However, they use other source to schedule diabetic classes.  Client would like to import scheduling data into Qualtrics.

 Hello friends,I'm developing a survey with many entries. I want to use it as a sort of search engine where the user enters the first three letters and the closest option appears. I need your help, please. 

Hey Qualtrics Community! It may be right under my nose (or not), but is there a tool or feature within Qualtrics to create a banner table?  New user here, so any help would be greatly appreciated!!

How are you?We have been using Qualtrics in the company for 2 years now and we have started collecting TNPS surveys in several Customer Journeys. We are currently implementing Close The Loop.I would like to talk to some companies that are already using Qualtrics and what improvements the platform has brought to their area or company.Contact me in private.André MissanoBrazil

we run about 21 different courses on Brightspace. I’d like to set up one survey that will offer up different blocks of questions depending upon which course they’ve just completed.we either embed the Qualtrics at the end of the course or could automate a link to be sent.whilst we could of course ask what course they’ve just done, I am wondering if the distribution link can be used as a proxy for that information.ie multiple distribtion links that go to the same survey, but the link itself sets some of the survey parameters?currently we have one survey for each course, which is a complete pain! difficult to know where to start- any pointers appredciated :)

How do I restrict so that whole numbers only and not decimals are allowed?  I thought entering 0 in Max Decimals under validation would work, but apparently not. Also, in other form fields where I have custom validation I cannot ALSO add validation to require a whole number, or at least it doesn’t seem like I can.  Seems like I am limited to one set of validation logic?  We have logic to require a value greater than that answered in a prior question and there isn’t a way to add a content validation on top of that.